Home
Overview
People
Site Services
Shop Services
Equipment
Clients
Standards
History
Newws
Vacancies
Contact
Phone 07 4952 6222
Intn'l +61-7-4952-6222
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Dedicated workshop
The new Union floor borer in operation.
Austbore completed its additional workshop in late 2004. The main reason for the expansion was to make way for the installation of the Union floor borer.
This machine was imported from Bristol, UK. It has a 9.5metre x-axis travel and a vertical travel of 2.5metres. It can take unlimited weight.
Since installation, it has been retrofitted with CNC control on four axes. This is one of only two such machines north of Brisbane.
The workshop is equipped with20tonne and 10tonne overhead cranes enabling a 30tonne job to be put on the machine.

Hamai CNC BedMill :

Fully equipped for all types of milling:
  • A new Hamai CNC Bedmill has just been installed.
    This brings greater scope and accuracy in milling, drilling and tapping.
    It is further enhanced with a fourth Axis CNC rotary Table capable of precise positioning (eg: spline and gear cutting).
  • A new Kiheung milling machine has been purchased to update older machines.
    This machine has 2.0metres of X travel and it can take 4000kg on the table.
    It also has point-to-point control making it semi-automatic.
    Machining up to 4tonnes on the table is now possible.

Fully equipped for all types of boring:

Computer-controlled lathes:

  • Stanko vertical boring machine will accept 1650mm diameter x 1000mm high. With side table installed, it will machine both bore and outside simultaneously.
  • Daewoo 130mm spindle horizontal boring machine with a capacity of 9tonnes on the table.
  • Scharmann 130mm spindle horizontal boring machine, retrofitted with UF drives. 2.0m travel.
  • Scharmann 100mm spindle horizontal borer, 6tonne on the table.
  • European F.A.T. Wroclaw 3000mm between centres and 630mm over the bed.
  • English Harrison Alpha lathe 1500mm between centres and 400mm over the bed.
  • Okuma CNC LB25 lathe will produce repetitive smaller work giving Austbore customers the advantage.
Sheiss CNC Controlled Vertical Borer: Mori Seiki LA7:
  • 2200mm swing + 1600mm under the tool with two computer-controlled rams.
  • 1000mm swing x 4000mm centres CNC controlled lathe for the heavy duty work

Home | Overview | People | On-Site Services | Workshop Services

Clients | Standards | History | News | Vacancies | Contact

©2003 Austbore Pty Ltd